| Customization: | Available |
|---|---|
| After-sales Service: | Good Aftersales Service |
| Warranty: | 3 Years |
|
Still deciding? Get samples of US$ 160/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Model: NM-RMBR-1010
Size (LxWxH, mm): 571 × 45 ×1100
Membrane area (m2): 10
Hollow fibers inside and outside diameter (mm): 1.0 / 2.2
Design Flux (L / h): 150-200
Working pressure (KPa): 10-50
Operating temperature (° C): 5-45
Work PH: 1-10
Hollow fibers: reinforced PVDF
Description:
Our membrane bioreactor (MBR) is very high quality and reasonable price, which is combination of a membrane process like microfiltration or ultrafiltration with a suspended growth bioreactor, and is now widely used for municipal and industrial wastewater treatment
| Type | NM-RMBR-1010 |
| Membrane area per element (m2) | 10 m2 |
| Nominal pore size (μm) | 0.06µm Micron (Average) |
| Material | PVDF, PET non-woven fabric and ABS resin |
| Membrane Element dimension | Height: 1100mm |
| Wide: 571mm | |
| Thickness: 45mm | |
| Filtration Method | Suction /Outside-in |
| Hollow fibers I /O diameter | 1.0 /2.2 mm |
| Design flow rate | 10-25 L/m².H (Sewage design 15---25 L/m².H) Industry wastewater:10---20 L/m².H Landfill leachate: 5---8 L/m².H |
| Air diffuser | Fine bubble, tube type, EPDM rubber |
Application:
Membrane bioreactor (MBR) is the combination of a membrane process like microfiltration or ultrafiltration with a suspended growth bioreactor, and is now widely used for municipal and industrial wastewater treatment.
PVDF Membrane Bioreactor NM-RMBR-1010 is widely used for industrial and sewage waste water treatment, it's special better for packaged wastewater treatment plant in container.
MBR Advantages
MBR Membrane input raw water conditions
| Parameter | Unit | Operating condition |
| MLSS | mg/L | 6000---8000mg/L |
| DO | mg/L | 1.0 or more |
| pH | - | 5-9 |
| Liquid temperature | °C | 5---- 45 |
| Fibrous material | Must be removed at fine screen prior to MBR | |
| Fat, oil and grease (FOG) | mg/L | < 2 (at the MBR Tank) |
| Mineral oil | Must be reduced to no more than trace levels | |
| Hardness (CaCO3) | Mg/L | < 5, too high will harden the hollow fibers |
| Input SS (Solid Diameter) | mm | < 2mm |
| Interval working | 7 minutes working 1 minute stop | |
| Air Stirring Clean | 0.15---0.2m³/m².H | |
| Working Pressure | MPa | 0.1---0.3MPa |
Membrane Bioreactor NM-RMBR-1010 Paper carton pack, 5 pcs / carton
One carton gross weight: 30kgs
Dimension of Carton: 110* 60*30cm
){kind=link}